How To Build A Bar Step One

What Supplied Do You Need

       You are going to need all the basic wood working tools.  You'll need saws, a drill, screws, clamps, and glue.  You'll also need something to treat your wood and whatever you decide to finish the bar with.  The actual wood that you'll need is listed below by step.

       I recommend that you find out what lengths of wood are available to you and map out how to cut each piece so as not to waste any more wood than you need to.

Framing - 2x4s

• Quantity - Length
• 3 - 108"
• 1 - 105"
• 2 - 101"
• 2 - 40.5"
• 10 - 39"
• 3 - 21"
• 6 - 17"
• 2 - 14"

Skinning - 1/2" Plywood

• Quantity - Dimensions
• 2 - 109" x 42"
• 1 - 108" x 20.5"
• 2 - 24" x 42"
• 2 - 20.5" x 17.5"

Bar Top - Plywood or other material

• Quantity - Dimensions
• 2 - 120" x 30"
• 1 - 84" trim

Bar Railing - Bar Molding

• Quantity - Length
• 1 - 130"
• 2 - 36"

Bar molding available HERE.

       Please note that your bar may require more or less supplies.  This page is meant to give you an idea of what you may need.  It is recommended that you look over the plans thoroughly and decide exactly what you may need to build your own bar.

Move on to Step Two - Framing